SPECIFICATION
Recessed Paper Towel Dispenser and Waste Bin shall hold and dispense 475 standard multi-fold or 350 standard C-fold paper towels and shall have a waste capacity of 7.6 litres. Cabinet and door shall be fabricated of 18-8 stainless steel, grade 304. Cabinet
shall be 20 gauge with a 25mm wide perimeter return to lay flat against wall. Full face door shall be 16 gauge free of miters, welding or open seams with 24mm square horizontal returns to wall and 19mm rounded vertical edges. All four corners are welded and ground smooth with no open miters. Door shall be attached to the edge of unit with a full length 5mm diameter stainless steel multistaked piano hinge and shall be held closed with two (2) flush rimless tumbler locks keyed alike to other ASI JD MacDonald washroom equipment. Towel dispensing opening shall have a fully
deburred edge for snag-free dispensing and user safety. Waste bin shall be fabricated of stainless steel with hemmed edges and a finger-pull for ease of service removal. Structural assembly of body and door components shall be of welded construction. All exposed surfaces shall have No.4 satin finish.
INSTALLATION
Waste bin is free standing and should be placed in appropriateposition on finished floor.
WARRANTY
One year.
OPERATION
Waste material is deposited into the bin through the push in doors. Use of a disposable trash liner bag is recommended. The disposal bag is emptied of waste material on a cycle determined by maintenance needs by removing top assembly
