Gently radiused edges match the curves of the ASI Roval design. Frame fabricated of 18 gauge type 304 stainless steel with satin finish and polished seamless mitered corners. Tempered glass. Supplied with an 18 gauge corrosion protected steel ‘H’ bracket for mounting.

Security Framed Mirror with Rounded Corners for wall anchor plate mounting shall be fabricated of one piece formed alloy 18-8 stainless steel, type 304, 18 gauge with No 8 mirror polish. Installed unit shall project 11mm from wall. Frame shall be provided with eight (8) dimpled holes for ¼-20×3/8” long pin-Torx flat head machine screws (supplied).

Fabricated of 14 gauge type 304 stainless steel, satin finish exterior, glass blasted satin matte finish interior. 114 mm interior depth accommodates one standard toilet tissue roll. Hidden contraband causes roll to project from holder allowing detection. Two “T” nuts welded on back for rear mounting.

Fabricated of 14 gauge type 304 stainless steel, satin finish exterior, glass blasted satin matte finish interior. 114 mm interior depth accommodates one standard toilet tissue roll. Hidden contraband causes roll to project from holder allowing detection. Two “T” nuts welded on back for rear mounting.

Fabricated of 14 gauge type 304 stainless steel, satin finish exterior, glass blasted satin matte finish interior. 114 mm interior depth accommodates one standard toilet tissue roll. Hidden contraband causes roll to project from holder allowing detection. Includes front mounting holes.

Security Framed Mirror with Rounded Corners for chase mounting shall be fabricated of one piece formed alloy 18-8 stainless steel, type 304, No 18 gauge with No 8 mirror polish. Installed unit shall project ¼” (6mm) from wall.

Security Framed Mirror with Rounded Corners for Front Mounting to wall surface shall be fabricated of one piece formed alloy 18-8 stainless steel, type 304, No 18 gauge wit No 8 mirror polish. Installed unit shall project 6mm from wall.

Surface Mounted Security Framed Mirror shall have frame fabricated of 14 gauge alloy 18-8 stainless steel, type 304. Structural assembly of frame components shall be of welded construction with six (6) mounting holes. All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.

Chase Mounted Security Framed Mirror shall have frame of alloy 14 gauge, type 304, alloy 18-8 stainless steel. Structural assembly of frame components shall be of welded construction with six (6) welded on threaded posts. All exposed surface shall be satin finish. Unit shall be provided with fiberboard backing.

Behind the Mirror (BTM) is designed with elegance and safety in mind, concealing consumables in a cabinet made from type 304 stainless steel. The cabinet features a mirrored door with back-lit icons that indicate functions provided from the bottom panel of each module.

18 gauge stainless steel shelf with satin finish and all edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 111 mm deep. See chart for standard sizes.

18 gauge stainless steel shelf with satin finish and all edges returned and hemmed for maximum rigidity and safety. Shelf is welded to face frame and is 108 mm deep. See chart for standard sizes.

19 x 16 mm roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. Mirror is vinyl backed and installed on a concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws.