HOW TO APPLY:
Damp-mopping and autoscrubbing
Dilute 1 part AUTOBRITE with 40 to 80 parts water.
Scrub the floor clean. When it has dried, buff to a high
shine with a buffing machine at 200-1200rpm.
Spray-buffing
Dilute 1 part AUTOBRITE with from 15 to 50 parts of water (depending on soilage level and desired gloss of finish). Spray this solution lightly over a square metre of floor then buff this area till it is dry. Continue with the next area until the whole floor is clean. Finally, dust-mop the floor to collect the dust and dirt left along the edges. Buffing will produce a hard wearing, shiny surface.
ENVIRONMENT CARE
Agar Autobrite conforms with all statutory environmental requirements. It is based on safe
ingredients selected to perform efficiently so there is no waste or damage. It is nonflammable,
biodegradable and phosphate-free. Containers can be recycled wherever possible. If containers are returned to Agar Cleaning Systems Pty Ltd, these will be cleaned and reused - thus reducing plastic usage and waste.