New Coat Hi-Temperature Pot Belly Black Paint

From
Add to cart
  • Description
  • More

New Coat Black High Temp is a high quality heat resistant coating designed to stop rust and restore that brand new, satin black finish to your pot-belly stove, barbecue, oven, heater, flue and any other metal parts that are subject to heat.

New Coat Hi-Temperature Pot Belly Black Paint Features:

 - Perfect for heat-exposed metal that’s rusting or needing a new coat.
- Heat resistant to 500 degrees C
- Easy application
- Restores that brand new, satin black finish to stoves, flues and BBQs
- Can be applied without primer.
- Colour - Low Sheen Black

It is formulated to withstand heat up to 500°c and can be applied without primer, to stop rust and restore that brand new satin black finish to pot-belly stoves, BBQs, ovens, wood heaters, flues and any other metal parts that are subject to heat.

Available in 250ml, 500ml, 4L and 350g spray can.

NOTE: Do not use over Cast Iron Stove Polish. Please note that Hi Temp Paint is classified as Dangerous Goods and is delivered with-in Australia Only. As this is a flammable product we are unable to send to PO Boxes, all Paint is sent via freight/courier.

How to use Hi-T Pot-Belly Black Spray Paint

- All surfaces must be thoroughly cleaned of loose dirt, grease and oil by swabbing with mineral turpentine.
- Remove all rust, mill scale, loose and flaking paint with wet & dry sandpaper and new smooth metal surfaces must be rubbed back to assist adhesion.
- Shake can vigorously for one minute before spraying and then occasionally while in use. Cover adjacent areas to protect from spray mist.
- For optimum appearance and rust protection hold can upright, approximately 20cm from surface and apply a pre-wetting mist coat, followed by a full even coat.
- Do not apply when ambient temperature is below 15c.

Related Products