BUILDERS KLEEN Directions
Lime, Scale & Rust Remover
Filter Cartridges:
- Dilute 1 part BUILDERS KLEEN with 3 parts water (250 mls per litre of water).
- Pour, Foam or Brush solution onto surface and allow to penetrate. Use a brush or deck scrub to agitate soil and assist soil removal.
- Thoroughly rinse with water.
- Repeat if necessary.
Excess Grout & Mortar
- Dilute 1 part BUILDERS KLEEN with 3 parts water.
- Brush solution onto surface and scrub until the excess grout has been removed.
- Thoroughly rinse with water. Repeat if necessary.
NOTE:
Do not use on marble, terrazzo, limestone or acid sensitive surfaces as it will etch these materials.
Do not use on nylon or at temperatures greater than 60 degrees Celsius.
BUILDERS KLEEN is low in pH and has a high salt level therefore is not recommended for use on aluminium.
Always pre-test the surface to be cleaned prior to application