INSTALLATION
Install unit on wall or partition surface with four (4) № 8 pan head selfthreading pan head or flat head screws (supplied). For general utility install unit 1067 to 1168mm above finished floor and 254mm minimum above countertop. Alternatively, unit may be installed on stand (Model № FS0300) with DS Tape supplied with stand. A MT (№ 05093041) is provided in carton with each unit. Install six (6) AA-size 1.5V batteries (by others) or one (1) 9V battery in concealed battery compartment according to polarity indication and snap-latch battery door. For mounting height standards refer to current Building Code of Australia for able bodied and/or disabled use. A mounting template is provided in carton with each unit.
OPERATION
Soap is automatically dispensed when hands are placed in sensor zone. Dosage is pre-set by factory. Unit is reloaded by unlocking lock with special key (supplied), swinging open dispenser body, and removing and
refilling internal soap container. Soap dispenser will continue to feed properly until empty. Tank supply is replenished manually on cycle determined by maintenance needs. Reusable tank may be replaced by
800 ml "Bag-in-a-Box" format sanitizer or soap disposable supplies.
