How to Use
Always pre-test the cleaning solution on the surface to be cleaned to check for any substrate instability or incompatibility with Tile Pro. Observe all safety directions and read and understand the SDS before use.
Usage: (Mineral scale build-up, efflorescence, cement residues and heavy duty applications)
Mix 1 part Tile Pro with 10 to 30 parts water (100-30ml/Litre). Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry.
Scrub thoroughly with applicable System 7 Combination pad.
Allow 10 to 30 minutes dwell time and re-agitate.
Extract/Pick up resultant slurry with extraction equipment.
Rinse with clean water.
Usage: (Maintenance and light duty applications)
Mix 1 part Tile Pro with 80 to 100 parts water (10-12ml/Litre) Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
Scrub thoroughly with applicable System 7 Combination Pad.
Rinse well with clean water.
SAFETY
Not classified as dangerous according to the Australian Dangerous Goods code.
Classified as irritant according to the criteria of Worksafe Australia.
Observe all safety recommendations made on the product label and MSDS
