SPECIFICATION
Surface Mounted Small Capacity Waste Bin shall have a capacity of 7.6 litres. Unit shall be fabricated of alloy 18-8 stainless steel, grade 304, 22 gauge with No. 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Bin shall have no exposed fastening devices or spot welded seams and shall have front outer edges rounded to 13mm radius. Unit shall be provided with four (4) ‘key hole’ slots on rear for hanging on pre-installed screws.
INSTALLATION:
- Hang unit on (4) No. 10 screws (supplied by others) on wall through concealed mounting 'key hole' slots.
- For mounting height standards refer to current Building Code of Australia for able bodied and/or disabled use.
OPERATION
Waste material is deposited into the bin through the open top. Waste material is removed on a cycle determined by maintenance needs. Use of a disposable trash liner bag (supplied by others) is recommended. Unit concealed 'key hole' slots may be lifted off mounting screws for dumping.
WARRANTY
One year
